During my studies and internships in industry I have gained experience in modeling of dynamic systems; designing and constructionof  basic digital/analog circuits (using EAGLE environment); designing user interfaces (GUI) and programming in MATLAB – Simulink – including fuzzy logic, neural network and genetic algorithms; C, C++ programming on systems Windows, Linux and on microprocessors technologies, programming/debugging on ATMEL, DSP Texas Instrument (basic) and PC104 platform. I also have acquired skills in PLC programming (LD, FBD) connected with sensors, actuators, field devices via industrial communication buses (Modbus, MPI, ASI, CAN, Profibus, HART, RS232, RS485).  

 

The main focus of my first master thesis was to design and construct a new test stand to monitoring and diagnose fed induction motors. The most part of master thesis was done using NI LabVIEW 2011 environment and NI equipment. The ready test stand has been used for teaching at university with success. As you can see in section "About us" my master thesis was awarded by TT HI-Tech company. 

 

Studies at Wroclaw University of Technology (WUT) as well as internships in industry taught me how to work in international teams. I have intermediate English skills (ACERT SJO certificate of WUT – B2 level). I graduated one of my master program in English. I have a pre-intermediate German skills (GOETHE Institut certificate - B1 level) which I would like still to improve. Whereby I started work with my brother at one of the service companies in Rhein Main area. There I could use my knowledge and experience in practice. As a result I did few serious internal and external projects for companies connected strongly with automotive branch, but not only. During this time I strongly expanded my skills and experience in areas of: test stand reparation and develop, automatic & control (step motors), automotive commnication - CAN interface - Vector devices, documentation and report creation also with PTC Integrity. In addition I have also learned how to manage the project not only from the technical point of view. Taking into account experience accumulated so far, very good efects of self work and determination, I and my brother decided to establish our own MAAT company.

 

◊ Graduate Wroclaw University of Technology 

      ◊ 2007 – 2011 Bachelor of Engineering 

      ◊ 2011 – 2012 M.Sc.  Electrical Engineering 

      ◊ 2012 – 2013 M.Sc.  Mechanics (Automotive) 

      ◊ 2011 – 2013 M.Sc.  Electronics 

◊ 2009 h_da Hochschule Darmstadt (Internship) 

◊ 2011 DELPHI Poland S.A. (Internship) 

◊ 2015 – 2018 Service company (in Rhein Main area) 

      ◊ Teststand software development 

      ◊ Electrical/electronics engineering 

      ◊ Application software engineering for automotive 

◊ 2018 MAAT 

Piotr Moroń Krzysztof Moroń

Krzysztof Moroń

Managing Director

Piotr Moroń

Managing Director

◊ Graduate Wroclaw University of Technology 

      ◊ 2008 – 2012 Bachelor of Engineering 

      ◊ 2012 – 2013 M.Sc.  Mechanics (Automotive) 

      ◊ 2013 – 2015 M.Sc.  Electronics  

◊ h_da Hochschule Darmstadt 

      ◊ 2009 – Internship 

      ◊ 2013 – 2014 Erasmus Program 

            ◊ Master Thesis by Linde Material Handling GmbH 

◊ 2011 DELPHI Poland S.A. (Internship) 

◊ 2014 – 2018 Service company (in Rhein Main area) 

      ◊ Basic software development for automotive branch 

◊ 2018 MAAT 

During my studies and internships in industry I have gained experience in: multi-thread programming in C, C++, C# on systems: Windows, Linux; microprocessors technologies – programming/debugging ATMEL, ARM based, FUJITSU, INFINEON AURIX multi-core microcontrollers without/with EOS like OSEK, AUTOSAR, PXROS-HR; designing basic digital/analog circuits (using EAGLE environment); Automotive Bus systems – CAN; modelling of dynamic systems, programming in MATLAB – Simulink; Industrial Automation; PLC programming.

 

The main focus of my master thesis was to evaluate new multicore INFINEON AURIX TC277 microcontroller and research of safety aspects realization on new platform for Linde Material Handling Company. During project realisation I took part in trainings and conferences conducted by Infineon and HighTec Companies. The result of my work was awarded by Professor Döhrer Stiftung at h_da Darmstadt University of Applied Sciences ( see section "About us").

 

Studies at Wroclaw University of Technology (WUT) and h_da, as well as internships in industry taught me how to work in team. I speak English (ACERT SJO certificate of WUT - B2 level) and German (GOETHE Institut certificate - B1 level) fluently. Good language skills and accumulated experience give me possibility to work through one of the service companies in Rhein Main area for automotive company where I developed my experience initiated during my master thesis. Time period of 4 years strongly grown my skills and experience in areas of: Embedded build process implementation/configuration (GNU Make), (SDE) Eclipse configuration with integration of chosen build process, startup code evaluation for multicore AURIX familly uC, HighTec real time PXROS-HR safety embedded operating system integration/configuration, safe data exchange (using MPU), design of the multi partition project, debugging (PLS Debugger), embedded memory management (linker/MPU settings), driver implementation (DSADC), integration of all tools, settings and sources required to build a project in one self-contained package, ready to be checked in to the files versioning system (PTC Integrity), CAN-bus (Vector tools), documentation and report creation. Based on experience, skills and good communication with my brother we decided to establish our own MAAT company.

All photos by

Moron K&P

Moron Krzysztof, Moron Piotr GbR

the engineers

Embedded Software Development, Automation Technology, Measurements and diagnostic MAAT - Moroń's Advanced Applied Technologies